WEGA Engine™
delivers the most realistic picture on flat panel displays with three clear benefits:Sharper Detail, Natural Colour and Superb Clarity

‘Industrial Design’ transparent acrylic layer bezel
Versatile and stylish design protects the actual painting and makes the display more robust against scratches during intensive usage.

Input connectors provided for composite, S video (Y/C) and RGB/component signals
The FWD-32LX1 has multimedia capability and can display visuals from a wide variety of signal sources. These range from standard video to HDTV, DTV and computer signals up to UXGA. For the reproduction of any composite video signals the optional BKM-FW10 video board is required.

Expandability (option slots)
To extend the connectivity of the FWD-32LX1 has one option slot available that can be equipped with different boards: video boards, an active-through board or a network board.

Selectable aspect ratio
The aspect ratio can be selected by the On-Screen Display menu or direct via the aspect key of the remote commander. Five different modes are available: Expanded 4:3 (16:9 wide zoomed)Letterbox (16:9 zoomed), Full 16:9, Subtitle (16:9), Normal 4:3 (using only the centre part of the screen for correct 4:3 aspect ratio)

Built-in audio amplifier and optional speakers
The FWD-32LX1 is equipped with an audio amplifier for clear and distinguished audio reproduction. With the optional SS-SP32FW speaker sets Sony delivers small size speakers with a great sound.

Picture-in-Picture (PiP) and Picture-and-Picture (PaP)
Picture in Picture (PIP) allows the user to watch more than one input source at the same time. With PIP, one source will be displayed on the entire screen and another source will be displayed in smaller square on the screen.

PANEL
Resolution:	1366 x 768 pixels
Panel brightness	500 cd/m2
Contrast ratio	600:1
Viewing Angle (H/V)	170 / 170
Pixel Pitch	0.51 x 0.51 mm
Active Area (W/H)	698x392 mm
Viewable Area	32-inch / 801 mm measured diagonally
Colours	16.7 million colours simultaneously
COLOUR SYSTEM	NTSC/PAL/SECAM/ PAL60/PAL-M/PAL-N/NTSC4.43
SAMPLING RATE	13.5 to 140 MHz
RGB	0.7 V p-p non composite, 1.0 V p-p composite, 75 Ohm
Y/UV	0.7 V p-p non composite (U/V) / 1.0 V p-p composite (Y), 75 Ohm
Audio	500 mV rms., high impedance
VIDEO	BKM-FW10 required
Composite In	BNC, 1.0 V p-p +/-2 dB, sync negative, 75 Ohm automatic termination
S-Video IN/OUT	Mini DIN, 4-pin,
Y/C In	Y: 1.0 V p-p +/-2 dB, sync negative, 75 Ohm, automatic terminationC: 0.3 V p-p (PAL), 0.286 V p-p (NTSC), +/-2 dB, sync negative, 75 Ohm
Audio In	-5 dBu, 500 mV rms., high impedance
Composite Out	BNC, loop-through
AUDIO OUT	Stereo mini jack, 500 mV rms., high impedance
SPEAKER OUT	2 x 7W (L/R), 6 Ohm
CONTROL-S	IN/OUT
REMOTE (RS-232C)	D-sub 9-pin
GENERAL
Inputs	D-sub HD15 / DVI-D HDCP
Power Requirements	AC 100 to 240 V, 50/60 Hz3.7 to 1.5A
Power Consumption	170 W (Max.)
Operating Temperature	0 to 35 °C (32 to 95 °F)
Storage Temperature	-10 to 40 °C (14 to 104 °F)
Humidity	20 to 90 %, no condensation
Dimensions	(WxHxD) 802 x 492 x 107
Mass	17.5 kg
WARRANTY	2 years parts and labour