The Wireless PHONEJack is the perfect solution wherever you need an extra telephone connection. These well designed plugs can easily be inserted anywhere in your home where you have electrical sockets. Just connect the base unit to the phone socket and plug into a power socket, and place the extension unit in a power socket next to the device that you need to connect. The PHONEJack gives you 50 metres of wireless connection. All without incurring any installation time or costs. It’s a 1-minute plug and play installation. Just plug in, communicate and relax.

The Wireless PHONEJack works with:

Corded and cordless phones

Answering machines

Fax machines

PC modems

Satellite set top boxes

VoIP adapters

All-in-one offi ce printer with built-in fax

High wireless modem signals:
High-speed analogue V.90/V.92 and V34 modem signals with up to 56Kbit/s (minimum of 28.8Kbit/s).

Scalability :
Connection of up to 4 extension units to a single base unit.

Interface :
1.8 GHz DECT air interface using DECT authentication and encryption.

PSTN interface – extension unit :
Line voltage :
3 intervals from base unit to extension unit
No line: <3V
Parallel telephone off hook: 3V > voltage > 18V
Idle line: >25V

Ringer signal :
25Hz ringer signal on extension unit.
Extension unit ringer signal (square wave) with >=50VRMS.

PSTN interface – base unit
Line interface
European TBR 37/38 with DTMF and optional pulse dialling supported.
REN <0.1REN load from base on telephone line.

CLI support:
Standard:
Bellcore 202, V.23 (EU)

Signal modes :
FSK DT-AS reception and generation.
FSK RP-AS reception and generation.
DTMF reception and generation in extension unit without pol-reversal.

Signal content :
Calling line identity (EN 300 659-3)
Calling party name (EN 300 659-3)

Connectors:
Base station :
Two RJ11 plugs on base for connection to PSTN line and plug through to other PSTN services.

Extension unit :
One RJ11 plug for attachment to modem, fax or telephone.

Dimensions Size: 95x60x75mm.

Weight :
<100g.

Operating temperature :
10°–40°C – for indoor use only.

LED signalling :
MMI: 1 colour (green) LED on base and 3 colour (yellow, green and orange) LEDs on extension unit


Power supply :
230V +/- 10%.

Power consumption :
Idle mode: <1W. Active mode: <3.1W. Active mode ringing: <3.1W.

Safety :
IEC 60695-2-11 (Glow Wire).
IEC 60950 (CE).

DECT :
TBR 10.
TBR 37.
TBR 38.
TBR 6.
EN 300 444 – GAP.

EMC :
EN55022.
IEC 61000-4 and 64000-3.
IEC 1000-4 (over voltage and current).

Environmental :
RoHS and WEEE.
IEC 60068.